WS-C2960X-24PS-L Specification |
General |
model info: | WS-C2960X-24PS-L |
enclosure type | Rack-mountable - 1U |
Ports | 24 x 10/100/1000 + 4 x 1G SFP |
Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
Available PoE Power | 370W |
Forwarding bandwidth(Gbps) | 108Gbps |
Maximum stacking number | 8 |
Stack Bandwidth | 80G |
Forwarding Performance | 71.4Mpps |
Switching bandwidth | 216Gbps |
Maximum active VLANs | 1023 |
MAC Address Table Size | 16K (default) |
CPU | APM86392 600MHz dual core |
RAM | 512 MB |
Flash Memory | 128 MB |
Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed |
Expansion / Connectivity |
Console ports | USB (Type-B), Ethernet (RJ-45) |
Stacking cable | Optional |
Power Redundancy | Option (PWR-RPS2300) |
Voltage range (Auto) | 110V-240V |
Power Consumption Operational | 0.49KVA |
Miscellaneous |
Width | 17.5 Inches (44.5 cm) |
Depth | 14.5 Inches (36.8 cm) |
Height | 1.75 Inches (4.5 cm) |
Package Weight | 23.48 Pounds (10.65Kg) |
Weight | 12.8 Pounds (5.8 Kg) |
Rack Mounting Kit | optional |
MTBF in hours | 324,280 |
Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol |
● IEEE 802.1p CoS Prioritization |
● IEEE 802.1Q VLAN |
● IEEE 802.1s |
● IEEE 802.1w |
● IEEE 802.1X |
● IEEE 802.1ab (LLDP) |
● IEEE 802.3ad |
● IEEE 802.3af and IEEE 802.3at |
● IEEE 802.3ah (100BASE-X single/multimode fiber only) |
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports |
● IEEE 802.3 10BASE-T |
● IEEE 802.3u 100BASE-TX |
● IEEE 802.3ab 1000BASE-T |
● IEEE 802.3z 1000BASE-X |
● RMON I and II standards |
● SNMP v1, v2c, and v3 |
● IEEE 802.3az |
● IEEE 802.3ae 10Gigabit Ethernet |
System software / license |
System software | IOS LAN BASE |
license | NERGY-MGT-100-K9, EW-DO-100-DE |
features | ●RPS Support |
● Jumbo Frames |
● VLANS |
●Voice Vlan |
●VTPv2 |
●CDPv2 |
●LLDP |
● 802.3ad LACP |
● PVST/PVST+ |
● 802.1W/802.1S |
● Port Fast/Uplink Fast |
● port CoS Trust and Override |
● Scheduling |
● Priority Queuing |
● Configure CoS Priority Queues |
● Weighted Tail Drop |
● DSCP transparency |
Network security | ● SSH, SSL and SCP |
● RADIUS and TACACS+ |
● SNMPv3 crypto |
● 802.1x |
● 802.1x Accounting / MIB |
● 802.1x w/ port security |
● 802.1x w/Voice VLAN |
● 802.1x Guest VLAN |
● 802.1x VLAN assignment |
● 802.1x MAC-Auth Bypass |
● BPDU/Root Guard |
● Port Security |
● Private VALN Edge |
● Storm Control |
● Block unknown unicast and multicast |
● IGMP Snooping |
● IGMP Filter/Throttle |
Management and Troubleshooting | ● Auto-MDOX |
●TDR |
● UDLD |
● IP SLA Responder |
● layer 2 / IP Traceroute |
● SPAN |
● RSPAN |
● Express Setup |
● Device Manager |
● Cisco Network Assistant |
● Smartports + Advisor |
● Troubleshooting Advisor |
● Drag-and-drop Cisco IOS Upgrade |
● IP Address DHCP |
● Autoinstall with saved configuration |
● Configuration Replace |
● DHCP Auto Image Upgrade |
● DHCP Port Based Allocation |
● Error Disable MIB |
Environmental Ranges |
Operating temperature up to 5000 ft (1500 m) | 23ºF to 113ºF |
Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF |
Short-term exception at sea level* | 23ºF to 131ºF |
Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF |
Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF |
Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF |
Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF |
Operating altitude | Up to 10,000 feet |
Storage altitude | Up to 13,000 feet |
Operating relative humidity | 10% to 95% noncondensing |
Storage relative humidity | 10% to 95% noncondensing |